COURSE INFORMATION

Disclaimer

This course information may be updated and amended immediately prior to semester. To ensure you have the correct outline, please check it again at the beginning of semester.

K98 Bachelor of Engineering Bachelor of Business

There is a growing demand in high-technology industries and research centres for engineers who also have knowledge and professional skills in business, management and finance.  While providing a major area of study in any one of the Civil, Mechanical, Mechatronics, Instrumentation Control & Automation, Computer Systems, Electronics & Communications, or Electrical Power Engineering areas, this double degree program broadens the overall knowledge of students in areas which are complementary to their technical skills. This double degree course requires a minimum of five years of full-time (or part-time equivalent) study.

 

HONOURS IN ENGINEERING
Students whose performance over the five years of the course is of a high standard may be awarded the Bachelor of Engineering with Honours degree.

 

PRACTICUM REQUIREMENTS
During the course, students will be required to undertake a minimum of 12 weeks practical work experience located in an engineering industry environment. This will normally be undertaken during a vacation period, even though it is listed as a unit for Year 5 (ENS4111).

 
ADMISSION REQUIREMENTS

Standard University entrance requirements apply.

 

Portfolio pathway applications will not be accepted for this course.

 
SPECIAL ADMISSION REQUIREMENTS
Satisfactory performance in WACE Mathematics 3C/3D or Mathematics: Specialist 3C/3D, or equivalent.
WACE Physics 3A/3B, or equivalent is desirable.
 
Note: Students who have not passed WACE Physics 3A/3B or equivalent will be required to complete a bridging unit during the first year of their studies.
 
COURSE LOCATION
This course is available on Joondalup Campus.
 
MODE OF STUDY
This course is available by Full-time, or Part-time mode.
 
MODE OF DELIVERY
This course is available in the following mode of delivery - On-campus.
 
COURSE STRUCTURE

The Bachelor of Engineering (BEng) and Bachelor of Business (BBus) double degree course consists of 47 units (including one 0 credit point Practicum unit) and requires a total of 690 credit points to be completed. This includes units to a total value of 450 credit points in the Bachelor of Engineering program, consisting of 16 core engineering units and a 15 unit engineering major. The BBus consists of 16 units in total including an 8 unit major to a total of 240 credit points. Please note that students undertaking a Major in Accounting (MAAAAH) and wishing to attain CPA/ICAA/IPA accreditation will be required to undertake an extra 30 credit points (2 units).

 

The Double Degree Structure:

 

16 BEng Core Units (including the Practicum unit)

15 BEng Units for an Engineering Major (selected from the options below)

3 Business Edge units

5* Business Core units

8* Business Major units (selected from the options below)

 

* Note: As each Bachelor of Business major contains one additional Business Core unit within its structure, students must ensure their choice of Business Core units includes the unit required by that major. Failure to do so may mean that students are required to take additional units to satisfy the requirements of the major. 

 

Business Program 

 

Business Edge (3 units)
 
Students must complete the following 60 credit points (4 units) of Business Edge units:

BES1500   Business Communication and Analysis
BES2500   Business Professionalism and Career Management
BES3500   Business Capstone

PLUS


Business Core *  (5 units)

 

Students must complete a minimum of 75 credit points (5 units) of Business Core units selected from:

ACC1100    Accounting I
ECF1110     Economics I
ECF1120     Finance I

ECF1151     Quantitative and Statistical Techniques for Business
LAW1100    Legal Framework I
MAN1100    Management I
MAN1600    Information Systems for Business

MKT1600    Marketing Principles & Practices    

FBL3501     Business Practicum **

 

Note: Some Business majors have required Business Core units to meet pre-requisite or accreditation requirements. Please refer to the major structures below for details.

 

** FBL3501 is by application only. Students must have completed a minimum of 180 credit points to apply and are required to submit a current resume, a statement addressing their suitability and attend an interview.

 

PLUS  

 

Business Major Program (8 units) (which includes one additional Business Core unit)

 
YEAR ONE - SEMESTER 1
MAT1236 Calculus 1 15
ENM1102 Engineering Drawing and Computer Aided Design 15
BES1500 Business Communication and Analysis 15
Business Core unit 1 (15 credit points)
 
YEAR ONE - SEMESTER 2
ENS1162 Electrical Engineering 1A 15
MAT1163 Linear Algebra 15
Business Core unit 2 (15 credit points)
Business Core unit 3 (15 credit points)
 
YEAR TWO - SEMESTER 1
ENS1154 Introduction to Engineering 15
MAT2437 Differential Equations 15
CSP2151 Programming Fundamentals 15
Business Core Unit 4 (15 credit points)
Business Core Unit 5 (15 credit points)
 
YEAR TWO - SEMESTER 2
ENS1101 Engineering Mechanics * 15
ENS1115 Materials and Manufacturing 1 15
ENS1253 Electrical Engineering 1B 15
BES2500 Business Professionalism and Career Management 15
Business Major 1 (15 credit points)
 
* Students who have not passed WACE Physics 3A/3B (or equivalent) must complete the bridging unit SCP1132 Introduction to Physics before they can enrol in ENS1101 Engineering Mechanics.
 
YEAR THREE - SEMESTER 1
ENS2159 Engineering Innovation and Ethics 15
Engineering Major 1 (15 credit points)
Engineering Major 2 (15 credit points)
Business Major 2 (15 credit points)
Business Major 3 (15 credit points) %
 
% Students completing the Instrumentation Control&Automation Engineering major should enrol in Engineering Major 3 in place of Business Major 3 in this semester, and enrol in an extra Business Major unit in Year 5 Semester 1.
 
YEAR THREE - SEMESTER 2
Engineering Major 3 (15 credit points)
Engineering Major 4 (15 credit points)
Engineering Major 5 (15 credit points)
Business Major 4 (15 credit points)
Business Major 5 (15 credit points)
 
YEAR FOUR - SEMESTER 1
Engineering Major 6 (15 credit points)
Engineering Major 7 (15 credit points)
Engineering Major 8 (15 credit points) ^
Business Major 6 (15 credit points) ^^
Business Major 7 (15 credit points)
 
^ Students completing the Mechanical, Mechatronics, or Computer Systems Engineering majors should enrol in Business Major 8 in place of Engineering Major 8 in this semester and should enrol in Engineering Major 8 in place of Business Major 8 in Year 4 Semester 2.
^^ Students completing either the Instrumentation Control&Automation major or the Electrical Power major should enrol in ENS4251 Control Systems instead of Business Major 6 in this semester, and enrol in a Business Major unit in place of ENS4251 in Year 5 Semester 1.
 
YEAR FOUR - SEMESTER 2
Engineering Major 9 (15 credit points)
Engineering Major 10 (15 credit points)
Engineering Major 11 (15 credit points)
Not found Not found 0 
Business Major 8 (15 credit points)
 
YEAR FIVE - SEMESTER 1
ENS4111 Engineering Practicum 0 
ENS4152 Project Development 15
ENS4251 Control Systems # 15
Engineering Major 12 (15 credit points)
Engineering Major 13 (15 credit points)
 
# Students completing the Civil Engineering major should not enrol in ENS4251 Control Systems, they should enrol in ENS3106 Hydrology and Hydraulics in Year 5 - Semester 2 instead.
 
YEAR FIVE - SEMESTER 2
ENS4253 Engineering Project 15
ENS4543 Engineering Management 15
Engineering Major 14 (15 credit points)
Engineering Major 15 (15 credit points)
 
 
MABUSOCivil Engineering Major
MABUSNComputer Systems Major
MABUSQElectrical Power Major
MABUSLElectronics and Communications Major
MABUSMInstrumentation Control and Automation Major
MABUSPMechanical Engineering Major
MABUSKMechatronics Major
MAAAAHAccounting Major
MAAAHDEvent Management Major
MAAAAIFinance Major
MABUUVHotel Management Major
MAAAAOHuman Resource Management Major
MAAAAQInternational Business Major
MABUUTLaw in Business Major
MAAAANManagement Major
MAAACXMarketing Major
MAAAHMPlanning Major
MABUUOProject Management Major
MABUUHSport Management Major
MABUUUTourism and Hospitality Management Major
 
 
Disability Standards for Education (Commonwealth 2005)
For the purposes of considering a request for Reasonable Adjustments under the Disability Standards for Education (Commonwealth 2005), inherent requirements for this subject are articulated in the Unit Description, Learning Outcomes, Graduate Attributes and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the support for students with disabilities or medical conditions can be found at the Student Equity, Diversity and Disability Service website:
http://intranet.ecu.edu.au/student/support/student-equity

Last Updated - Higher Education: 15/03/2014 VET: 14/05/2014